Friday, December 24, 2010

Chipped and Dipped (in the mud).


Hit the KV with the foam chipper and dusted the chassis and fenders. Probably spending too much time on this on but it is a huge mini compared to the others I have painted - weighs like a pound or so!

 I think I will add some slogans to this one - Za Rodinu! or some such...
 I may add some mud and static grass to the running gear as well but not sure at this point. All paints used on this mini were Vallejo; washes all vallejo paints with plain water and all airbrush work thinned with plain blue Windex with a drop of Windsor Blending medium to aid flow and prevent nozzle clogging.
Happy Holidays!

Troy

Thursday, December 23, 2010

Happy Holidays - Back in Business!

Hey All.

Merry Christmas to all and here is wishing everyone a peacful New Year! Finally got the new computer, just in time for Christmas! I have been working on some of the FiB Russian Infantry (Maxim HMG teams) and a BF KV-1.

I added  a bit of battle damage to the turret and hull to replicate photo evidence I have seen of these uparmored KVs. I also added a tow cable, a new commanders hatch cover (the supplied one was too small) couple DP-27 MGs as well as screened air intakes. Still have to do some paint chipping and add some mud and dust.

I have picked out figures from both FiB and BF to make up my Russian Maxim teams so this will be a good test of their compatibility. I emailed FiB regarding the mangled German tripods and bitched about the incorrect HMG loaders as well as the incorrect German helmets and did recieve a responce but time will tell if they correct these things. I am optimistic...


Should have some pics up of the painted FiB fellows soon!

Troy

Sunday, December 12, 2010

FiB Germans Review

Next up from FiB are 15mm Germans
G-INF01 German Rifle Platoon.

This is an early to mid-war offering. All figures have with high boots and most have high collars. MGs are 1 x MG34 and 2 x MG42.
My blister contain 40 figures consisting of:
29 x riflemen in 10 x poses (some with only one included, others with 5), 4 x NCOs in 2 x poses with SMGs, 1 x Officer with SMG, 3 x MG-42 LMG teams, and 1 x 50mm mortar team.

THE GOOD.
- Again, this is a quality product. Well packaged and crisp detail as well as minimal flash.
- White metal is of very high quality. Very strong.
- Most face and hand detail is good.
- Uniform detail is accurate and very well sculpted.
- Overall, equipment is very well done. Grenades, gasmask can, haversack, mess tin, entrenching tools and webbing are very good. Gasmask can is particularly well done. This is nice to see as may companies model this in sizes ranging from massive to itty-bitty.
- 50mm mortar team is very well done.
- Lots of grenades molded on.
- Again these mix well with most BF figures.

THE BAD.
- Most of the helmets are too tall and flare too much on the bottom. Not the best around. Disappointing.
- Kar-98 Mauser rifles are a bit fat and detail is just ok.
- Some heads are too big. Some hands are too small. One in particular (Officer) has a skeleton hand that ruins an otherwise excellent figure. Not sure how to go about fixing this...
- Most water bottles are too small and lacking in detail.
- Not the best MG-34 or MG42's I have seen in 15mm but not the worst, built more for strength than accuracy.
- Poses are ok overall but somewhat boring.
- Figure bases are small. May not be a real issue but there are no team bases supplied either. FOW bases are easy to find though...

BOTTOM LINE: 34/40. Recommended. These figures are nice overall, but the poor representation of the iconic German helmet really brings down this offering. May not be as big an issue with everyone.
Accuracy 7/10 - Good overall detail. Helmets, water bottles and rifles bring down a 10/10.
Variety: 9/10 - Believable but boring poses.
Quality: 9/10 - Strong metal, good packaging, good casting. A few miscast areas.
Scale: 9/10 - Mix well with BF. Some large heads and small hands bring down a 10/10.

--------------------------------------------------------------------------------------------------------------

G-INF02 German HMG Platoon.
My blister contain 12 figures and 4 x HMGs consisting of:
4 x gunners, 4 x ammo loaders, 4 x kneeling figures.

THE GOOD.
- Well packaged and crisp detail as well as minimal flash.
- White metal is of very high quality. Very strong.
- Most face and hand detail is good.
- Most uniform detail and personal equipment is accurate and well sculpted.
- Again these mix well with most BF figures.

THE BAD.
- Lafette tripod are miss-cast and very poorly detailed. EPIC FAIL!
- Gunner is all wrong for the Lafette. He is firing by gripping the pistol grip and not the remote elevating handle and trigger mechanism of the tripod. Would be ok for LMG figure though. This is a case (I think) of trying to use 1 cast fits all.
- Ammo loader is loading from the wrong side of the MG42(!) ...another epic fail. Shown this way on the website too. Could face him backward on the right side (left actually) but this is a major F-up.
- Again, the helmets are too tall and flare too much on the bottom. Not the best around. Disappointing.
- Aside from 1 figure per team, all of the weapon teams are exactly alike. Not really any different from most other companies out there but...
- Some figure bases are small. May not be a real issue but there are no team bases supplied either. FOW bases are easy to find though...
- Some water bottle scale/detail issues and a few dud faces.

BOTTOM LINE: 32/40. While the figures themselves are ok, the blister is supposed to be HMG's and in that role, they fail miserably. Not recommended.

Accuracy 5/10 - Tripod, gunner, loader, water bottle, and helmet issues.
Variety: 8/10 - Believable poses but repeats and no schwere MG-34s bring down a 10/10.
Quality: 9/10 - Strong metal, good packaging, but poor tripod casting.
Scale: 10/10 - Mix well with BF.

--------------------------------------------------------------------------------------------------------------

G-INF03 German 8cm Mortars.

My blister contain 12 figures and 4 x mortars consisting of:
4 x loaders, 4 x ammo carriers, 4 x kneeling figures.

THE GOOD.
- Again, this is a quality product. Well packaged and crisp detail as well as minimal flash.
- White metal is of very high quality. Very strong.
- Face and hand detail is very good. Hands are very well scaled and all hands have 4 fingers and a thumb.
- The loader is actually dropping the round down the tube, no need to build him up or pose on a crate.
- Uniform detail is accurate and very well sculpted.
- 1-piece 8cm mortar is an excellent cast. It has a sight and well sculpted elevation mechanism.
- Overall, personnel equipment is very well done.
- Again these mix well with most BF figures.

THE BAD.
- Most of the helmets are too tall and flare too much on the bottom. Not the best around. Disappointing.
- Figure bases are small. May not be a real issue but there are no team bases supplied either. FOW bases are easy to find though...
- Aside from one figure, all of the weapon teams are exactly alike. Not really any different from most other companies out there but...
- Some figure bases are small. May not be a real issue but there are no team bases supplied either. FOW bases are easy to find though...

BOTTOM LINE: 38/40. Great kit, just fix the damn helmets!! Highly Recommended!

Accuracy 9/10 - Great overall detail.
Variety: 9/10 - Believable poses but repeats bring down a 10/10.
Quality: 10/10 - Strong metal, good packaging, good casting.
Scale: 10/10 - Mix well with BF.

Troy

FiB British Review

Next up from FiB are 15mm 1940 British

EWB1 1940 British Rifle Platoon.

My blister contain 41 figures consisting of:
27 x riflemen in 5 poses, 3 x NCOs with rifles, 1 x Officer with pistol, 3 x Bren teams, 1 x Boys ATR team, and 1 x 50mm (2 inch) mortar team.

THE GOOD.
- Again, this is a quality product. Well packaged and crisp detail as well as minimal flash.
- White metal is of very high quality. Very strong.
- Face and hand detail is very good. Hands are very well scaled and all hands have 4 fingers and a thumb.
- Uniform detail is accurate and very well sculpted.
- The 'Brodie' helmet is the best I have seen from ANY company out there. It is very symmetrical and scales well for 15mm.
- Pack, bayonet and scabbard, shovel and gasmask pack are very well detailed.
- Again these mix well with most BF figures.

THE BAD.
- Not many poses. Also, would have been nice to see few figures with bayonets.
- Head size is a wee bit large, no worse than early BF sculpts.
- Lee-Enfield detail is lacking on some figures and a few are a bit too short.
- Most water bottles are too small and lacking in detail.
- Not the best Bren gun I have seen in 15mm but not the worst, built more for strength than accuracy.
- Figure bases are small. May not be a real issue but there are no team bases supplied either. FOW bases are easy to find though...

BOTTOM LINE: 36/40. These are the best EW Britsh figures I have encountered so far. Highly Recommended!

Accuracy 8/10 - Great overall detail. Water bottles and rifles bring down a 10/10.
Variety: 9/10 - Believable poses but repeats bring down a 10/10.
Quality: 10/10 - Strong metal, good packaging, good casting.
Scale: 9/10 - Mix well with BF. Large heads bring down a 10/10.

--------------------------------------------------------------------------------------------------------------

EWB2 1940 Early War British 3" Mortars.

My blister contain 12 figures and 4 x mortars consisting of:
4 x loaders, 4 x ammo carriers, 3 figures covering their ears and 1 x Officer with binoculars.

THE GOOD.
- Again, this is a quality product. Well packaged and crisp detail as well as minimal flash.
- White metal is of very high quality. Very strong.
- Face and hand detail is very good. Hands are very well scaled and all hands have 4 fingers and a thumb.
- Uniform detail is accurate and very well sculpted.
- The 'Brodie' helmet is the best I have seen from ANY company out there. It is very symmetrical and scales well for 15mm.
- Pack, bayonet and scabbard, shovel and gasmask pack are very well detailed.
- 1-piece 3" mortar is an excellent cast. It has a sight and well sculpted elevation mechanism.
- Great poses! The loader is actually dropping the round down the tube, no need to build him up or pose on a crate. Excellent ammo carrier.
- Again these mix well with most BF figures.

THE BAD.
- Aside from one figure, all of the weapon teams are exactly alike. Not really any different from most other companies out there but...
- Head size is a wee bit large, no worse than early BF sculpts.
- Most water bottles are too small and lacking in detail.
- Some figure bases are small. May not be a real issue but there are no team bases supplied either. FOW bases are easy to find though...
BOTTOM LINE: 37/40. These are the best EW Britsh mortars I have encountered so far. Highly Recommended!

Accuracy 9/10 - Great overall detail. Water bottles bring down a 10/10.
Variety:9/10 - Believable poses but repeats bring down a 10/10.
Quality: 10/10 - Strong metal, good packaging, good casting.
Scale: 9/10 - Mix well with BF. Large heads bring down a 10/10.

--------------------------------------------------------------------------------------------------------------------
EWB3 1940 Early War British Vickers HMG.

My blister contain 12 figures and 4 x HMGs consisting of:
4 x gunners, 4 x ammo loaders, 4 x spotters.

THE GOOD.
- Again, this is a quality product. Well packaged and crisp detail as well as minimal flash.
- White metal is of very high quality. Very strong.
- Face and hand detail is very good. Hands are very well scaled and all hands have 4 fingers and a thumb.
- Uniform detail is accurate and very well sculpted.
- The 'Brodie' helmet is the best I have seen from ANY company out there. It is very symmetrical and scales well for 15mm.
- Pack, bayonet and scabbard, shovel and gasmask pack are very well detailed.
- 1-piece Vickers MG is well done and even includes a cooler water can and hose.
- Gunner figure is well done and grips the handles of the HMG well (he is molded with the grips so the weapon would need these added if stand alone. He is constructed in such a way as to be able to use as a binocular officer as well. In fact, this is the same figure from the mortar teams.
- Again these mix well with most BF figures.

THE BAD.
- All of the weapon teams are exactly alike. Not really any different from most other companies out there but...
- Head size is a wee bit large, no worse than early BF sculpts.
- Poses work but are pretty hum-drum and stiff.
- Figure bases are small. May not be a real issue but there are no team bases supplied either. FOW bases are easy to find though...

BOTTOM LINE: 38/40. These are the best EW Britsh Vickers teams I have encountered so far. Highly Recommended!

Accuracy 10/10 - Great overall detail.
Variety: 9/10 - Believable but dry poses bring down a 10/10.
Quality: 10/10 - Strong metal, good packaging, good casting.
Scale: 9/10 - Mix well with BF. Large heads bring down a 10/10.

Troy

Friday, December 3, 2010

Computer Dead

Hey All.

As my computer has died and refuses to startup, I will be offline - until its replacement shows up. If I can bum the wifes laptop, I will get the FiB reviews up but she doesn't like to share!

Should have a new one  (computer - not wife) in 2 weeks.

Troy

Tuesday, November 30, 2010

Finished PHQ Teams

Hey All!

Two posts today? I really gotta get a life...

Finished up the Platoon HQ teams today. Had a few issuses with color contrasts so adjusted some of my suggested Russian colors on the Ritterkrieg website.

I plan on painting up a batch of the BF Winter Russians to mix in with these next (maybe 1 per stand of 4). to give a September/October feel to them.

Added some orange to the mahogany to get the reddish color of the PPSH. Still don't know what the hell the Officer on the left is wearing...

Look for a review of the FiB UK troops tomorrow!

Troy

FiB Russian Mortars and MGs Review

Next up from FiB are 15mm Russians R-INF02 and R-INF03 Mortar and Maxim teams. These appear to late-war platoons (short collared uniforms). Each blister has four weapons and twelve crew.

THE GOOD.
- Again, this is a quality product. Well packaged and crisp detail as well as minimal flash.
- White metal is of very high quality. Very strong.
- The single-piece cast weapons are of very good detail, accuracy and quality, better than most.  In fact, these are the best 82mm Russian mortars I have seen yet. They even have the wheels molded into the base. Maxim MG model is also good.
- Great posed prone MG crew! Ammo belts and figures are all very well cast. There is no "He's laying down so we will skip his face detail" bullshit.
- Face and hand detail is very good. Better than average from other companies for other weapon teams.
- Uniform detail is accurate and very well sculpted.
- Again these mix well with most BF figures.

THE BAD.
- Aside from one figure per team, all of the weapon teams are exactly alike. Not really any different from most other companies out there but...
- Again, most head sizes on figures with caps are much too large.
- Again, helmets look more like UK paras than USSR. Too rounded and no ear-protection bow on the bottom. Strangely enough, they have modeled the outside rivet detail - while a nice gesture, it is completely out of scale for 15mm. Chin straps are also out of scale. IMHO, these are better left off to be painted in.
- There are some issues with the Maxim MG cast. The barrel jacket groves are only visible on half the model; top and left side. This is a small issue in an otherwise excellent one-piece cast.

BOTTOM LINE: 36/40. Highly Recommended!

Accuracy 9/10 - Great overall detail. Poor helmets bring down a 10/10.
Variety: 9/10 - A few excellent poses but repeats bring down a 10/10.
Quality: 9/10 - Strong metal, good packaging, good casting. MG detail issue brings down a 10/10.
Scale: 9/10 - Mix well with BF. Large heads on some figures brings down a 10/10.

Troy

Monday, November 29, 2010

FiB Russian Infantry Review

Well today was the day - my Forged in Battle (FiB) fellows showed up!

Russians R-INF01 Infantry  Platoon.

Up for review first are the 15mm Russians R-INF01 Infantry  Platoon. This appears to be a late-war platoon (short collared uniforms, late model rifles). Included are 40 figures in 17 different poses, some with only one of each, others with four.  There is a good mix of helmets and caps and a single officer figure. There are thirty-one riflemen, four PPSH SMG and four DP-27 LMGs.

THE GOOD.
- First impression is that this is a quality product. Well packaged and crisp detail as well as minimal flash.
- White metal is of very high quality. Very strong.
- There is a good variety of poses. Some are quite good.
- Face and hand detail is good. In some cases excellent.
- Uniform detail is accurate and well sculpted.
- Mix well with most BF figures.
- Price of product and shipping are reasonable from England to Canada.

THE BAD.
- Many figures doing the same thing (looking to the right for some reason, while advancing - who farted? )
- Rifle modeled appears to be the late M44 Mosin-Nagant with folding bayonet and the M38. There are no M1891/30 which was the most common model. Rifles all seem a bit too short but this could be from the model represented.
- Most head sizes on figures with caps are much too large. These may need to be replaced...
- Hand size is another issue. We are all used to the paws that BF models on their figures so these will seem tiny in comparison. While they are actually more accurate in size, the fact that the head size is still large on some, it makes hands on the capped figures look like skeletons. May not be as bad with a head transplant...
- Helmets look more like UK paras than USSR. Too rounded and no ear-protection bow on the bottom. Strangely enough, they have modeled the outside rivet detail - while a nice gesture, it is completely out of scale for 15mm. Chin straps are also out of scale. IMHO, these are better left off to be painted in.
- Knapsacks on some figures are a wee bit small.

BOTTOM LINE: 33/40. Recommended!

Accuracy 8/10 - Good overall detail. Helmets and lack of rifle detail bring down a 10/10.
Variety: 8/10 - A few excellent poses. A few duds and repeat poses bring it down a 10/10.
Quality: 9/10 - Strong metal, good packaging, good casting. Base size a bit small.
Scale: 8/10 - Mix well with BF. Large heads, small hands on some figures.

Troy

Sunday, November 21, 2010

Vallejo Painting tips.

Hey All!

Pictured above are 8 figures in various states of completion that I will be using for Platoon HQ teams. As I worked on the next batch of Russians, I realized that I seem to be thinning the Vallejo line quite a bit when doing shadow and shading. I tend to use them at a very watery level but this allows for a subtle transition not possible with most other acrylics. Just be sure and unload your brush on a rag (touch it on a rag to remove much of the paint) before attempting detail work on faces and such or it will run everywhere!

I have a spare figure of the fellow in the middle and may customize him to look like the fellow in the post prior (Alexey Yeremenko ). I will add a set of binos and change the head to a yelling one as well as changing the open hand to a fist.

Added a pistol strap to the 3rd figure from a thin band cut from a thin metal galvanized sheet. 
I had a bit of trouble finding a reference photo for the 5th figure from the left. Originally, I was painting him up as a Captain or Major (he is listed as a Commisar on the BF website). I could not find any pictures of the jacket he is wearing (with sheepskin collar). There are longer ones in photos I have but those have sheepfur cuffs too. I think that it maybe simply a peasent coat or non-military one. Any ideas? 

Anyway, I have been updating the Vallejo paint reference on the Ritterkrieg site as I find more accurate colors for the Russians - stay tuned...
 
Update: You can click on the 'Recommended Colors' link on the right sidebar to access my current color choices. 

Cheers!
 
Troy

Tuesday, November 16, 2010

Mixing Paint

Hey All.

A short post tonight about Vallejo paints and few trials and errors I found in trying to find a suitable thing to add to the bottles to assist in mixing those buggers up properly. First off, Vallejo really needs to be shaken well before using as there are many pigments in the bottles and they settle out pretty quickly.

So I tried brass beads I found in a fishing shop. They oxidize into a black sludge and this tainted the color of most paints. Removed these. Tried chrome ball bearings. They began to rust after a few weeks - and would you belive that Vallejo paints are magnetic?!? Found that out when trying to remove the bearings with a neodyne magnet. Big mistake! Paint crawled out of the bottle and attached itself to the mag like it was alive!

Finally got all the bearings out...lost a fair bit of paint...The latest thing are Hermatite beads. They seem perfect, various sizes (9mm will fit into Vallejo bottles), quite heavy, and they don't seem to oxidize - rust or otherwise. I put a few into a bottle of water and they haven't changed in 2 days. Not too sure if they will change in the actuall paint but I will let you know! Stay tuned...

Painted up a few Russians figures for Platoon HQs. I switched to Yellow Green 881 from Khaki Grey 880 and really like this color! (above) Its quite a bit greener. Shade by adding black and highlight by adding white. Looks pretty close to color pics I have seen.

BTW, the left figure in the picture above is one of the better I have seen by BF. Its a great pose, based I believe, on the photo at left. It even has the strap from the tokerov pistol modelled on the other side of the figure.

This iconic WWII picture is of Junior political officer, Alexey Yeremenko leading an attack  by the 220th Regiment, 4th Rifle Division, July 1942.

He died seconds after this picture was taken...


I finally recieved a letter back from Battlefront. I have posted my letter and the reply. Take from it what you will...


Hello Battlefront.

I am sure that you do not hear enough about when you get it right regarding miniatures and I am probably guilty of that. You do a very good job on the whole with accuracy and sculpting and I have been buying up many of your boxed sets and blisters over the last 4 years. I also realize that there will be the occasional figure that is miscast or is indeed a real dud. No problem if the rest are within a certain quality range. In the past, your company has been exceptional at replacing any miscast parts for me and I have continued to support you financially as well as positive reviews on my site as well as my postings.

That said, after waiting patiently for the re-issue of the Early War line, it was with great disappointment that I inspected your latest figures. The German and UK Infantry seem to be a real step backward. My excitement of receiving over 200 dollars worth of figures turned to dismay and then to anger as I felt that I have truly been ripped off. I started by looking at the German figures. There were some OK figures but overall, they had the look of a rush job. Strange poses, flash is heavy, faces miscast and Rifles look like walking sticks, or are too short.  The web gear on the Germans is not even correct. Those that have suspenders are wearing crossed suspenders in the back - not the 'Y' type and no strap for the gas mask. Torsos are thin to the point of flat, high boots are REALLY high (totally out of scale).

Then I opened the British…Bayonets look like flash; SMLE Rifles are too short, too thin and not detailed at all. Poses are boring, and bizarre (so many figures waving), scale is out, flash atrocious, finger prints on the castings of some figures, I could go on and on...

These figures, for the most part, would require too much work to be brought to a so-so level. Heads need to be replaced; hands re-carved and heavy flash (the kind that erases detail) would need to be removed. What’s left is still a poor figure.

My question to you is this:

Is this the direction that BF is taking? I cannot continue to support your company if this is where you are going. I do hope that in future you will be bringing the quality back to where it has been in the past.

Thank-you,

Sincerely,

Troy Ritter

Hi Troy,

Thanks for the email and I appreciate the honest comments.

It has been interesting to see what people think of the new EW ranges as
they were not sculpted by Evan Allen (who has sculpted the majority of
figures in the past). To be completely honest these ranges seem to have
really polarised our customers into two camps - one that loves them, and
one that has similar feedback to yourself. From our perspective this is
both wonderful and terrible as we sincerely want our customers to enjoy
painting and assembling the models as much as putting them on the table
and playing with them.

To address your question, you will be happy to know we have already
taken steps to improve the quality issues you have outlined (for example
Evan has just completed a new range of heads that will serve as our
masters and retain more detail through the multiple casting processes
that a figure is subjected to) and I am confident that you will see an
improvement in the future. Obviously this will take time to filter
through, but I am confident you will be as blown away by what is being
worked on for the next book, just like we were.

If you have any other comments or concerns please don't hesitate to drop
me an email.

Regards
Chris Townley

Monday, November 15, 2010

Be-Decalled


Hey All!

Added a Battlefront patriotic slogan to the T-26. Had to cut the decal into 2 to get it to fit right. Seems a bit large but currently, I don't have any smaller ones. Dom's Decals at:
 https://sslrelay.com/www.domsdecals.com/sess/utn;jsessionid=154ce1879bb2927/shopdata/index.shopscript

has a wide array of great decals for various scales. I have some although currently, they do not have any Russian slogans, I highly recommend their products. I may try and find a white gel pen to try and do up my own. Stay tuned...

Should be seeing the FiB minis any day now...maybe today! Just looking at the pictures, I am thinking the German helmet sculpt is a bit too much like a WWI-era helmet, too high and too wide a brim. Should be an easy fix but we will see...

I will be trying out a new matt acrylic varnish from Vallejo to seal and protect the T-26. Brutally expensive at 20 buck for a 400ml spraycan, it had better work well! I will be comparing it to a similar acrylic product from a company called PLAID that is half the price but comes out more like a gloss. Vallejo's spray looks to be less toxic than Dullcote - no CFC's, toluene, xyleme and labeled non-toxic (only warning label is Flammable, probably due to the aerosol gas) which is a big plus! I will let y'all know if it fits the bill...

Troy

Saturday, November 13, 2010

Tiny Terror

Hey All.

Started to paint the BF T-26 while waiting for the basecoat to dry on the next bunch of Soviets and couldn't put it down! Pretty much completed the painting, just need to seal, decal and dulcote.

Great little tank, not too much to paint on it but the detail is good for such a small mini.



Tried out a custom mix for the base color. Its a bit involved but I think the result is worth the mixing. All Vallejo:

2 x drops Russian Green 894
4 x Drops Golden Olive 857
1 x Drop White 951
A teeny weeny bit of Flat Red 957

The red is needed as the green is too green on its own to replicate the color shown in reference modern photos of the T-26 from museums.

Wet and dry mud splatters added after a great tip from fellow painter on the FOW forum, Tanner. I have always liked the 1/35 scale mud shown on models and tried to replicate it here with static grass and PVA glue/sand. I painted using some cheap craft paints.

BTW, chain is an made from an earing donated by my daughter. Had just the right scale chain on it and managed to convince her I needed it!



I also got a great little package from a great company In Calgary, Alberta

Sentry Box

My new online hobby shop. Great pricing for Canadian hobbiests and quick as hell shipping!


I ordered a few new paints and a couple FOW 15mm goodies, namely an Elephant and a blister of Soviets in Greatcoats (after seeing how cool they looked painted up on the FOW forum by a fellow painter here: http://www.flamesofwar.com/Default.aspx?tabid=126&aff=10&aft=520841&afv=topic&afnp=727181

The Soviets are done in the early sculpt style and are excellent quality. I plan on adding a few to the Soviets I'm working to replicate the rag-tag Russians fighting in Stalingrad in the Fall. Should add some interest to the poses and break up the similarity.

Time is running out for those of you wanting to get in the EW sculpts on eBay. Currently going for a buck each (all they are really worth!) Would work pretty well for anyone who is more of a gamer than a painter.
Here:


and here:


Later,

Troy


Thursday, November 11, 2010

A Day to Reflect...

Hello All.

As today is Remembrance Day in Canada, I thought it might be a good thing to post up an entry dedicated to my Grandfather, Clarence Pearson Dunphy. Initially, I believe, he was in a militia unit but then enlisted in the Canadian Army December 16th 1940 and was assigned to the 14th A.A. Battery in Halifax, Nova Scotia. As he enlisted as General Service (GS), he was sent overseas in July 18th 1944 to the U.K. and then was landed in Northwest Europe (France) November 18th 1944.

Upon arrival in Europe, he was re-assigned as a 2nd on the Bren, 'A' Company, Queens Own Cameron Highlanders of Canada (Rgt), 6th Infantry Brigade of the 2nd Canadian Infantry Division and fought in Holland and Germany. He was wounded February 5th 1945 when the jeep he was travelling in hit a mine or unexploded demolition charge (his explanation) during an attack. He spent the next month recovering in hospital before being returned to duty in March. He was then returned to Canada in April before being discharged in May 16th 1945.

He was the recipient of:

The 1939-45 Star awarded for six months service on active operations between Sep39 and May 1945.

The France and Germany Star for service in France/Holland /Germany between June 1944-March 1945.

The Defence Medal for service in the U.K. 1939-1945.

Canadian Volunteer Service Medal (CVSM) with Bar for volunteering for overseas serice and serving at least 60 days outside Canada.

The War Medal 39-45 awarded for 28 days between September 1939 and September 1945.

It was difficult to get him to talk of the war but he did open up on a few occasions. One sad story he told was of was a young replacement that came into the lines in the middle of the night. Taking up a position in the same slit trench as my Grampa, he was killed by a sniper in the morning when he put his head up and asked "So where are the Germans?"


He mostly kept it light. He used to joke that a shrapnel wound on the back of his neck was where a German soldier shot him for messing around with his girlfriend!

Pictured above before going overseas...

Picture upon arrival back in Canada. The strain and aging of combat is plainly etched in his face.

Grampa was as much a father figure to me as a Grandfather and always made time for me. He passed away February 2002 and will always be missed...

Troy

Tuesday, November 9, 2010

Projects A-plenty!

Hey All.

Finished up basing the GHQ/FO for the German Kompanie. Tried out a bit of Silflour 'Buffalo Grass' (Late Summer color) and let me tell you, this stuff is awesome! Its so real looking that it looks like a weed sprouted out of your base! Very expensive though...

Not too sure if it clashes with the crappy static grass I have been using. I may base up the Russians with Silflour alone. Stay tuned...

 I still have a few support teams to base up (2 x MG34's, 1 x Motar and 3 x ATRs) but want to keep up the momentum I now have with the Russians so they will have to wait 'till I get bored of painting Khaki!

Finished up the crew of the PaK 36 and really like how they turned out! I subbed in a fellow from the German HMG blister to hold a 3.7cm round as the loader provided was hefting a 7.5cm shell for what looked like the leIG18! Made the shell from a pin and placed it in a hole drilled in his hand.

 Added a shovel to the trail leg (as per photos) and new handles from wire. I may tone down the rust a bit once based.

Tried basing the gun toward the short end of the base as per the website photos but there really isn't the room to properly place the crew around the gun. It looked a bit weird to have the commander behind everyone pointing for no one to see.

I really do not like too much on the base. Not a fan of mini-diorama based infantry, lugging tons of terrain with them into houses, down roads, through the tulips...I plan on only adding a few cases and live/spent rounds surrounding the gun. I would really like a few stray rifles to base but can't bring myself to hack up perfectly good figures. I currently have the EW Germans out there on eBay so they are out unless they don't sell...hmmm...might be the best use for them.


Primed up the Russian Platoon HQs and a T-26S. Added a tow chain, a scratchbuilt toolbox and spare wheel and screened the air intake. As per photos of the real thing, these were commonly seen. Should be painting up these tomorrow...

Anyone know of any 15mm weapons manufactures out there??

Enjoy!

Troy

Friday, November 5, 2010

Russian Company Thus Far...

Hey All.

Finished up the first platoon of the Russians. Just love these guys! Easy to paint and accurate! Should get a few more done this weekend. Also working on a PaK 37 and crew - should have a few pics up soon. Based up the German FO and GHQ and will paint and flock this weekend.


I am probably going to flog the new EW Germans and Brits to anyone wanting them. Too much work to get to where I want them. I just cannot believe how F-ed in the A these are.

The equipment for the Germans isn't even close to accurate. There are so many mistakes, its almost as if the sculptor has no knowledge of the subject (probably didn't - can you say outsourced?). Those that are wearing suspenders have 'X' type crossed in the front and back (they should be Y shaped). As well huge gas mask cans are attached to the soldiers belt??! and have no strap. Bread bags have a small flap at top and no attachment tags, seemingly attached on the back to the belt (it should have a large flap with 3 attachment points, Battlefront has modeled these quite well in the past so what gives?!) Water bottles are depicted with a cap and no strap. Most boots are hip-waiter-sized!

The poses show no knowledge of human anatomy. The MG-34 gunners are gripping the weapon all wrong. There are figures firing while on tiptoes. The 50mm mortar crew has his ass so far in the air, it looks like he is expecting an enema! Kar-98 rifles are OK, probably the best of the items presented but the SMLE .303 is a joke. Details are terrible!

Anyone interested, email me with an offer. I don't want much, but cash or trades welcome! There are quite a few soldiers, a FOW platoon of each with MG and Mortar support. If no ones interested, they go on eBay next week...

As an aside, I ordered a platoon each of Germans, LW & EW Brits and Russians with MG/Mortar support from Forged in Battle. I will let you know the quality when they show up...

Happy Painting!

Troy

Wednesday, November 3, 2010

Finishing Up

Hey All.

Sent a letter to Battlefront regarding their latest infantry. I will refrain from posting it here for now. I am hoping I get a response. If not, it may be the last of their new Infantry I buy.

Finished the last of the 5 Panzer IVf1s from the 24th Panzer. Also completed the Forward observer team and the GHQ for the Grenadier Kompanie. Really happy how they turned out. I really like these early figures and hope that BF can get back to where they once were headed...

I had to re-darken some of the shadows on the tanks after the flatcoat as it greyed out the details (done after the picture was taken).

Added a few scratchbuilt items to the teams (radio, headphones, grenades and MP40). I was going to base the GHQ on a large base but thought it would look strange and be hard to fit into terrain.

Grenades were simple - brass wire inserted into wire insulation with a crazy glue built-up end cap screw.
Maps were printed after reducing the hell out of WWII German 1942-era maps of Stalingrad (no frickin kidding!).

Radio was a lot of work and looks good at gaming distance...love the scrub on the Funkers helmet! Actually painted on the lightning bolt to the left arm on these two! Terrain was a crop test piece...too much work and time...I think I will go with carpet...Groundwork still wet as I wanted to post before bed...

Enjoy!

Troy

Sunday, October 31, 2010

Bugger Off!

Happy Halloween!

I don't know if I am PMSing (painting missing sex) or just being a prick but the FOW thread I started to showcase my minis has been seeing a few posts of others work lately and I may have took it too seriously. Kind of feel like a jerk about it but it seemed at first to be a deliberate hi-jack...

Renamed the thread from "My First Flames of War Miniatures" to "Ritterkriegs FOW Miniatures" to clear up any confusion. Am I getting too self-centered?! Comments welcome!

Currently, on the painting table, I am priming up the next 8 Russians and a T-26 (you know, for when I get bored!) Should have a pic up soon...


Tried out the IWATA airbrush yesterday on a PaK 37. WoW!! Smooooth! Kicks my old badgers ass! Panel shading was a snap. Control, ease of use, and clean-up were awesome! Especially as the subject was so small!  I am going to try it out on the T-26 tomorrow. Post up some pic when done...

Anyway, had a near miss tonight when I was setting off fireworks for the kids out in the yard. There was this big, squat tuna-can shaped bastard of a firework. Didn't look as if you could bury it as the fuse was set low. Anyway set it on the ground and lit it...1st shot straight up, second shot horizontal toward neighbours house, (damn thing fell over!), third toward our car, 4th hit other neighbours house so hard, it broke siding and burned a hole.

No one hurt - thank the firework gods, I wonder if they sell sun-bleached grey siding anywhere...

Take care,

Troy

Friday, October 29, 2010

Give Me The Ol' Sculps Anyday...


Hey All.

    A fair bit of work on the Infantry tutorial yesterday - check it out on the Ritterkrieg site. If interest warrants (comment, and emails appreciated!) there will be a separate tut on face painting. I gotta say, I really love the old/mid production minis. They may have be fat bastards but they look great painted! I just cannot understand BF moving away from their quality that they established early on. I have tried the 'other' manufactures and they all came up short in one way or another. BF's early sculpts have action, accuracy, scale and faces! A joy to paint and display.

Although I may be able to put together a rag-tag (mix and match, body-part replacement, orgy of reconstruction) Company out of the BF old and new EW British sculpts, I will be ordering a pack of Forged in Battle soon to see if they fit the bill for my needs. Stay tuned...

To answer a few questions from the blog comments:

-I will be sending BF an email regarding the poor quality.
-The spent shells are heavy guage wire cut to length and white-glued down.
-Red Orchastra IS alive (and kicking)...Must resist the dark side...

...Mail came today, my IWATA HP-SB Plus is here! Can't wait to try it out today! Stay tuned...

Troy

Wednesday, October 27, 2010

Eight is enough...


Hey All.

Pictured above are some of the best sculpted figures from the EW British. Too bad they are all doing the same thing (ok the grenade thrower is not doing like everyone else but the pose is all wrong for tossing a grenade and he looks the same as the others). Believe it or not, these are all unique poses, some with only an adjusted leg or turned head.

I am a bit surprised I didn't get any hate mail from the previous post about the Battlefront stuff. I must admit, I wrote it in anger (and disappointment) but it needs to be said. BF has made and continues to make great figures (really love the details on their LW Russian and UK Infantry) but these EW figures are so bad that they seem like they are made by another company. I have been waiting sooooo long for early-war Brits and even went as far as buying up an overpriced OOP blister of the old sculpt on eBay. They are miles better than the new ones but still not that great.

Speaking of the old sculpts...


Above is a new sculpt with (left) with an old one (right). There are a quite a few of the new sculpt that dwarf the older figures. They are simply too huge to mix. Welcome to the spares box...

Pictured left is a little caddy I made up yesterday to hold all my Vallejo paints after finally having had enough of the searching for that damn hull red in all those browns! I found that at a 30 degree angle, the colors are much easier to find than in the foam tray they come in. As well, there was no way I could keep these bottles organized as they invariably ended up scattered all over the painting table.  

To make it, I took a 3/4" 12x30" piece of plywood and cut one edge at 30 degrees. I then cut 3 kerfs at 3.5" intervals and glued in 1/4 plywood strips that were 1 3/8" wide. I added edges and back supports and volia! Organization baby!

I am currently in the process of doing a paint swatch sheet up for reference and it was while doing that that I discovered how close that Yellow Green 881 and Dark Yellow 978 fit the bill for Russian Khaki uniform color. I had previously been using Khaki Grey but that was a bit too brown. Stay tuned...

Troy

Tuesday, October 26, 2010

WTF!



Hey All.

First off, let me say that I am not a fan-boy of any line of figures or have allegiance to any miniature company in any scale. I only promote what I believe is in gamers and painters best interest. I always give you my truthful thoughts and I refuse to BS you when there is something wrong. I also know that there will be the occasional figure that is miscast or is indeed a real dud. No problem if the rest are within a certain quality range.

The picture above is a sample of the quality (or lack thereof) of the new Battlefront EW figures.  In a word, they are shit. Total shit.

My excitement of receiving over 200 dollars worth (loosely using the work here folks) of figures turned to dismay and then to anger as I felt that I have truly been ripped off. I started by looking at the German figures. There were some OK figures but overall, they had the look of a rush job. Flash was heavy, faces miscast and Mausers looked like walking sticks. Hmmm...who mastered these?!

Then I opened the British...

WTF?!?

 What the hell are these? Bayonets look like flash, SMLE Rifles are too short, too thin and plainly not detailed at all. Poses are boring, and bizarre (so many figures waving bye-bye perhaps to BF's fan-base), scale is out of wack, flash atrocious, faces a joke, helmets look like Chinese farmers (maybe they sculpted these?!) finger prints on the castings of some figures, I could go on and on...I stopped looking after 2 bags.

These figures, for the most part, would require too much work to be brought to a so-so level. Heads need to be replaced, hands re-carved and heavy flash (the kind that erases detail) would need to be removed. Whats left is still a poor figure. Where did BF get these? Certainly not Evan Allen...

I will not buy any more BF figures unless they fix this. It is not up to their standards at all. What happened?!
I am considering a letter to BF...

I did have a bit of good news in the mail today - I am the proud new owner of 5 new Kolinsky Sable brushes (one winter harvest!!). Truly quality brushes at reasonable prices here:


They are a Canadian company so this may not be good for US readers but I am very happy with the service and quality.

Take care,

Troy 


Thursday, October 21, 2010

Russian Infantry Tutorial


Hey All.

Just a note to have a look at the new addition to my website dealing with a 15mm Infantry painting tutorial here:

http://www3.telus.net/Ritterkrieg/progress5.htm

I will be adding to it as I get more done.

Happy Painting!

Troy

Too Fat or Too thin.

Hey All.

All photos in this post are from BF website...

While excited and impatiently awaiting for the arrival of my broken down BF EW 15mm German and UK infantry from the EW Army sets...

Great idea for those with limited cash that only want certain 'new' items...ordered here: http://store.waterloominis.com/

...it seems that Battlefront has shifted away from the disproportionate big-headed, no neck, figures of early blisters, to a more realistic, but sometimes too skinny-headed soldiers. The old sculpts look great even compared to new ones and the slightly oversized everything is easier to paint. I think in some cases they may have gone too far toward Ethiopean stature.

Case in point, compare the 'old' Russian sculps...

 
...with 'new' Russian sculpts...
 
 
While there are a few really unusable figures, overall I think it is a step in the right direction. Facial detail has been increased slightly but made smaller so it may be harder to paint for some. I will let you know once I paint a few up.
 
The new UK Late War BR812 has it just about right, except for one Officer. His head was soooo skinny - it was laughable. The picture really doesnt do it justice, it was only about 2mm wide! I have since lopped it off and replaced it with a fatter one.
 
 
 
Your thoughts,
 
Troy